INK | 53.03m | 14s | Battistella | S2 Architecture

General rating of the project

  • Great

    Votes: 8 27.6%
  • Good

    Votes: 16 55.2%
  • So So

    Votes: 3 10.3%
  • Not Very Good

    Votes: 2 6.9%
  • Terrible

    Votes: 0 0.0%

  • Total voters
    29
I still can't make up my mind. Nice colours. They accentuates all the filler panels which is not a good thing.

There's different shades (of the same colour). Is it intentional?
 
Hi Group,

I Know this Group has this Project plus One in Kensington on the Go. Do They Have Anything Else or Will it B Time for a Breather for a While.

Tnx,
Operater
 
[QUOTE="There's different shades (of the same colour). Is it intentional?[/QUOTE]

I think it is just a protective film on those panels that make them appear different shades. If you look closely at the orange panels from the close up pics, you can see that there is a film on the darker ones.
 
https://www.instagram.com/battistelladev/

26072931_411645895940328_7148691241322938368_n.jpg
 

Attachments

  • 26072931_411645895940328_7148691241322938368_n.jpg
    26072931_411645895940328_7148691241322938368_n.jpg
    898.1 KB · Views: 294
Hi All,
Guess it will B different Once all the Blue is gone and the Real Colours are Part of the Structure.

Tnx,
Operater
 
A few shots from this morning. I'm liking the balconies with offset angles.

2018 Feb 10 066.JPG 2018 Feb 10 065.JPG 2018 Feb 10 063.JPG 2018 Feb 10 062.JPG 2018 Feb 10 061.JPG 2018 Feb 10 060.JPG 2018 Feb 10 059.JPG 2018 Feb 10 058.JPG
2018 Feb 10 061.JPG
 

Attachments

  • 2018 Feb 10 066.JPG
    2018 Feb 10 066.JPG
    266.1 KB · Views: 548
  • 2018 Feb 10 065.JPG
    2018 Feb 10 065.JPG
    255.2 KB · Views: 565
  • 2018 Feb 10 063.JPG
    2018 Feb 10 063.JPG
    309.6 KB · Views: 538
  • 2018 Feb 10 062.JPG
    2018 Feb 10 062.JPG
    332.7 KB · Views: 550
  • 2018 Feb 10 061.JPG
    2018 Feb 10 061.JPG
    340.9 KB · Views: 639
  • 2018 Feb 10 060.JPG
    2018 Feb 10 060.JPG
    366 KB · Views: 556
  • 2018 Feb 10 059.JPG
    2018 Feb 10 059.JPG
    278.1 KB · Views: 545
  • 2018 Feb 10 058.JPG
    2018 Feb 10 058.JPG
    308.9 KB · Views: 531
Oh... oh god. Why did they do two different shades for the red?
 
There’s different shades in the same position for every colour. Or it’s just a sheen change.

At first I thought it was just a film that needed to be removed but it’s too consistent now.
 
On the blue side, you can see panels (with a protective film) in the same locations that have a different hue, with a similar consistency
 

Back
Top